Call us
MENU

For more details about גיזוגראונד Gisoground PCI, fill the form below:

  • Description

    • Solvent-free to TRGS 610; Giscode D1
    • EU 2004/42/IIA(g)(50/30): < 15 g/l.
    • Improves the strength and solidity of substrates and helps increase adhesion of tiles, plasters and wallpapers
    • Reliable adhesion of PCI tile adhesives to PCI Gisogrund primer
    • Protects thin-bed mortars and levelling compounds from too rapid dehydration on absorbent substrates, extends the open time, improves adhesion and prevents formation of cracks caused by shrinkage
    • Prevents formation of blow holes and too rapid dehydration when levelling floors with PCI Periplan, PCI Periplan fein or PCI Periplan Tixo
    • Protects calcium sulphate (anhydrite) screeds from forming ettringite
    • Enables wallpaper to be easily removed
    • Complies with the guidelines issued by Bundesverband der Gipsbauplatten- und Gipsindustrie (German gypsum industry association)
  • Uses

    • For indoor and outdoor use.
    • For walls and floors
    • Primer for absorbent substrates to protect subsequent material from too rapid dehydration
    • Primer prior to the application of flowable and non-sag floor levelling compounds, e.g. PCI Periplan, PCI Periplan fein or PCI Periplan Tixo and other mortars and anhydrite screeds which set through hydration
    • Primer for anhydrite screeds and building boards
    • Primer for mastic asphalt screeds prior to the application of PCI tile adhesives
    • Primer to strengthen mealy, absorbent screed surfaces and plasters indoors prior to the laying of tiles and mosaic
    • Acting as a moisture barrier and primer for plaster, plaster slabs, gypsum fibre boards, plaster boards, aerated concrete, concrete, asphalt, render and brickwork before tiling and wallpapering
    • Primer for aerated concrete and brickwork on walls prior to the application of plaster and gypsum lime plaster
  • Technical Details

    MATERIAL
    Material base modified acrylic resin dispersion
    Components single-component
    Density approx. 1.0 g/cm³
    Control colour blue
    Labelling to:
    - Carriage of Dangerous Goods by Road, Rail and Inland Waterways

    - Regulation for hazardous substances

    non hazardous

    no labelling requirement for this product

    Shelf life min. 12 months
    Storage in dry conditions, no permanent storage over +30°C, but not below -10°C. Frozen PCI Gisogrund should be slowly thawn and stirred thoroughly.
    Packaging size 200 l barrel

    20 l pail

    10 l pail

    5 l pail

    1 l bag

    APPLICATION
    Substrate Consumption Mixing ratio
    Gypsum based substrates; anhydrite screeds, mastic asphalt screeds, xylolith screeds; screeds with old adhesive residues approx. 80 to 150 ml/m² undiluted
    Absorbent mineral substrates, e.g. concrete, cement screeds, gauged renders, aerated concrete, limestone or similar 1st coat

    approx. 100 to 200 ml/m² (200 to 400 ml undiluted mix)

    2nd coat

    approx. 50 to 70 ml/m² (100 to 140 ml undiluted mix)

    1st coat

    diluted 1 : 1 with water

    2nd coat:

    diluted 1 : 1 with water

    Coverage 20 l pail covers 10 l pail covers 5 l pail covers 1 l bag covers
    Gypsum based substrates; anhydrite screeds, mastic asphalt screeds, xylolith screeds; screeds with old waterproof adhesive residues approx. 130 to 250 m² approx. 65 to 125 m² approx. 33 to 62 m² approx. 6.5 to 12.5 m²
    Absorbent mineral substrates, e.g. concrete, cement screeds, gauged renders, aerated concrete, limestone or similar 100 - 200 m² for one coat;
    74 - 130 m² for two coats
    50 - 100 m² for one coat;

    37 - 65 m² for two coats

    25 - 50 m² for one coat;

    19 - 33 m² for two coats

    5 – 10 m² for one coat;

    3.7 - 6.5 m² for two coats

    Working temperature +5°C to +30°C

    (substrate temperature)

    Curing times*
    - walkable after approx. 30 - 60 minutes
    - 2nd coat after approx. 30 - 60 minutes
    - subsequent application after approx. 60 - 180 minutes (depending on the absorbency of the substrate as well as temperature and humidity)
    Temperature resistance of cured film -20°C to +80°C
    * At +23°C and 50% relative humidity. Higher temperatures reduce, lower temperatures increase the times given. Higher humidity increases the times given.

For more details about גיזוגראונד Gisoground PCI, fill the form below:

[contact-form-7 404 "Not Found"]